Blog

How an out-of-network claim gets priced, and how to ask the plan how

The allowed amount on an out-of-network claim comes from a plan formula, not the provider bill. How the methods work, a $5,000 example and what to ask the plan.

When you see a provider outside your plan's network, the plan does not pay a percentage of what the provider charged. It first decides how much of the charge it recognizes, called the allowed amount, and then applies your deductible and coinsurance to that number. The provider's bill can be far higher than the allowed amount, and in many situations the provider may bill you for the difference. How the plan picks the allowed amount is set out in your plan documents, and you are entitled to ask it to explain.

This post walks through the methods plans use, works a $5,000 charge from bill to final balance, and gives you the questions that get a plan to show its method.

Three numbers on every out-of-network claim

A claim carries more numbers than most people notice. Keep them separate.

  • The billed amount (or charge). What the provider put on the bill, from its own price list. It may bear little relation to what any insurer pays anyone.
  • The allowed amount. What the plan decides the service is worth for payment purposes. Everything your plan calculates starts here. The glossary entry allowed amount defines it.
  • The plan payment and your responsibility. Your out-of-network deductible, then coinsurance on the rest of the allowed amount, determine your share, and the plan pays what is left of the allowed amount.

The gap between billed and allowed is not a discount. It is the amount the plan does not recognize. If the provider is out of network, it has no contract obligation to accept the allowed amount as payment in full, so it may bill you for that gap. This is balance billing. A provider in your network, by contrast, has agreed to write the gap off. The guide how out-of-network claims work: allowed amounts and balance bills covers this contrast in its basics.

How plans set the allowed amount for out-of-network care

Plans use one of a few methods, and the plan document names which one applies to which kind of service. Common ones:

  • A percentage of Medicare. The plan multiplies the amount Original Medicare would pay for the same service in your area by a percentage stated in the plan documents. Plans like it because Medicare publishes its rates for almost every service, and the result is predictable. Critics say Medicare's rates were not designed to be what a commercial patient owes, and in some regions they sit well below what local providers charge.
  • Usual, customary and reasonable (UCR). The plan compares the charge against a database of what providers in the area commonly charge for the service and allows an amount at a stated position in that data, often described as a percentile. Different plans use different databases and different percentiles, and the data are often licensed from a third party. See usual, customary and reasonable charge.
  • A plan fee schedule. The plan sets its own price for each service, sometimes tied to what it pays in-network providers or a share of that.
  • Reference-based pricing. Some self-funded employer plans set a benchmark price and a share of it that the plan will pay, and they tell members that anything above the benchmark is the member's problem unless the provider agrees to the plan's price. It is used more in employer plans than in individual market plans.
  • A negotiated one-off. For a particular patient and service, the plan and an out-of-network provider agree on a price, often called a single-case agreement. It is a negotiation rather than a formula. The post Should I ask for a single-case agreement with an out-of-network specialist? explains when to ask for one.

For some bills the method does not matter because federal law has replaced the method. Under the No Surprises Act, out-of-network emergency care and certain out-of-network care at in-network facilities are protected from balance billing, and the patient's cost sharing is calculated from a recognized amount rather than the provider's charge. The usual recognized amount is the plan's median in-network rate, the qualifying payment amount, unless a state law or an all-payer rate system sets another amount. The guide Surprise medical bills and the No Surprises Act: what is protected says what is covered, and the checker surprise bill protection checker helps you see whether your bill qualifies.

A worked example: a $5,000 charge

The numbers below are invented and round. They are an illustration, not anyone's real prices.

Say Priya has a plan with these out-of-network terms: an out-of-network deductible of $1,500, of which $500 has been met this year, and coinsurance of 40% (the plan pays 60%) after the deductible. A specialist outside her network charges $5,000 for a procedure. The plan's method yields an allowed amount, and the table shows what happens at two different allowed amounts, because the amount depends on the method.

Step Allowed amount $2,000 (say, a percentage of Medicare) Allowed amount $3,500 (say, a higher UCR percentile)
Provider's charge $5,000 $5,000
Remaining out-of-network deductible $1,000 $1,000
Allowed amount left after deductible $2,000 − $1,000 = $1,000 $3,500 − $1,000 = $2,500
Priya's coinsurance (40%) $1,000 × 0.40 = $400 $2,500 × 0.40 = $1,000
Plan pays (60% of the amount after the deductible) $1,000 × 0.60 = $600 $2,500 × 0.60 = $1,500
Priya's share under the plan $1,000 + $400 = $1,400 $1,000 + $1,000 = $2,000
Gap between charge and allowed amount $5,000 − $2,000 = $3,000 $5,000 − $3,500 = $1,500
What Priya could be billed in total $1,400 + $3,000 = $4,400 $2,000 + $1,500 = $3,500
Check: Priya + plan $4,400 + $600 = $5,000 $3,500 + $1,500 = $5,000

Three lessons follow from the arithmetic.

  1. The allowed amount moves everything. The same $5,000 charge leaves Priya with $4,400 to deal with in the first column and $3,500 in the second. The $900 difference comes entirely from how the plan prices the claim.
  2. The plan's share is smaller than it looks. The plan paid 60% of the amount after the deductible, not 60% of the charge. In the first column the plan paid $600 of a $5,000 bill.
  3. The largest piece is the gap. At $3,000 and $1,500, the gap exceeds the plan-level cost sharing in the first column and is still $1,500 in the second. The gap is the piece that appeals to the plan will not shrink, because the plan owes nothing on it. Only the provider can reduce it.

If the same claim were protected under the No Surprises Act, with a recognized amount of $2,000, the gap line would drop out: the provider could not balance bill, and Priya's cost sharing would be the $1,400 figure from the first column.

Also check what counts toward your limits. Plans differ on whether out-of-network allowed amounts count toward the in-network out-of-pocket maximum, whether there is a separate out-of-network maximum, and whether there is any out-of-network cap at all. The gap, the balance-billed amount, almost never counts toward either.

Why the bill can be so far above the allowed amount

A provider's charge is set from its own price list, sometimes called a chargemaster, and many providers set it well above what insurers actually pay, because most revenue comes from negotiated rates. When a claim reaches a plan with no contract with that provider, the plan's formula applies. The distance between the two numbers shows how far one method of pricing sits from another.

Some providers also set charges high on purpose for out-of-network patients, expecting to be paid a smaller negotiated figure later. If the provider has a financial assistance policy or accepts negotiated settlements, the charge is the opening position, not the price.

How to ask the plan how it priced the claim

Start by finding the line that says "allowed amount" or "plan discount" on the explanation of benefits. Then call the member service number on your card and ask for the answers below. Use the plan's document language, and ask for the answers in writing.

  1. "What method did you use to set the allowed amount on claim [number] for the service dated [date]?"
  2. "Which sentence of my plan documents authorizes that method? Please send me the page." Employer plans have a summary plan description, and individual and some other plans have an evidence of coverage or certificate.
  3. "If the method is a percentage of Medicare or a percentile of a database, what is the percentage or percentile, and which database or year of Medicare rates was used?"
  4. "What is the allowed amount for each procedure code on this claim?"
  5. "Does the allowed amount count toward my out-of-network deductible and out-of-pocket maximum? Does the balance-billed amount?"
  6. "Is this claim eligible for reprocessing at in-network rates, for instance because no in-network provider was available or because the provider directory was wrong?"

If you are in a self-funded employer plan under the federal law called ERISA, you can ask the plan administrator for the plan documents, and the plan must provide them. Many plans must also post machine-readable files that include historical out-of-network allowed amounts; a federal rule issued October 5, 2026 changes how often they are updated, from monthly to quarterly. Those files are large and meant for analysts, but a patient advocate or a researcher can search them for a service and a provider. The entry machine-readable files explains what the files hold.

What to do about the gap

The gap is the hardest part to remove, and the options work in this order of effort.

  • Check protections first. Was this emergency care, or care at an in-network hospital by an out-of-network clinician you did not choose? If so, federal law may bar the balance bill entirely.
  • Check whether the claim should have been processed in network. Wrong directory listings, no in-network option for the service, and continuing care after a provider left the network can all justify in-network treatment. The posts the directory said in network, but the claim came back out of network and How I ask my plan to cover an out-of-network specialist at in-network rates cover those routes.
  • Ask for an itemized bill and check it. Errors and duplicate charges inflate the gap. The guide how to negotiate a medical bill: steps and what to say has the steps for itemized bills and negotiation.
  • Negotiate with the provider. The allowed amount is a useful benchmark: tell the billing office what your plan recognized and propose paying that or a modest multiple of it, in a lump sum, in return for a written zero balance. Many providers accept less than the charge, especially for prompt payment. Ask about financial assistance as well.
  • Ask the plan to reconsider the allowed amount. If you have evidence that the plan's figure is far below what is customary locally, such as the provider's charge compared with other local providers, file an appeal asking the plan to reprocess the claim at a higher allowed amount. Plans often decline, but a documented appeal costs little and is the step that preserves your right to outside review.
  • Contact the regulator. A state insurance department regulates plans sold in that state, and the U.S. Department of Labor oversees many self-funded employer plans. The state department cannot generally act on self-funded plans, so check which regulator applies.

Key takeaways

  • The plan prices an out-of-network claim by its own method, and your deductible and coinsurance apply to the allowed amount, not to the provider's charge.
  • Common methods are a percentage of Medicare, a percentile of charges in a database, a plan fee schedule, reference-based pricing and a one-off negotiation, and the plan document should say which applies.
  • In the worked example, the same $5,000 charge left $4,400 to handle at an allowed amount of $2,000 and $3,500 at $3,500, so the pricing method is worth asking about.
  • Ask the plan for its method, the page of the plan document, the percentage or percentile and whether the allowed amount counts toward your limits, and ask for the answers in writing.
  • The gap between the charge and the allowed amount is usually reduced by the provider, not the plan, unless federal protections, an in-network exception or an error applies.

Terms used in this guide

Related tools

Related guides

Latest on this topic